Interfacing with other software

How do I interface with SUMO for VANET simulation?
Example code and documentation for this is available at http://tetcos.com/File_Exchange/NetSim_Interfacing_SUMO_for_VANETs.zip
Tue, 19 Apr, 2016 at 4:07 PM
How do I pass the node co-ordinates to MATLAB?
In NetSim the Device (nDeviceID) Coordinates can be accessed using the variables NETWORK->ppstruDeviceList[nDeviceID]->pstruDevicePosition->...
Tue, 3 May, 2016 at 12:40 PM
How to solve Error number=126 The specified module could not be found, when Interfacing with MATLAB?
1. Make sure that the following directory is in the environment variable PATH:  <Path where MATLAB is installed>\bin\win32 For eg: "C:\...
Fri, 30 Sep, 2016 at 3:42 PM
Troubleshooting - Interfacing MATLAB with NetSim
NOTE: MATLAB 32 bit can interface with NetSim 32 bit only. Similarly 64-bit MATLAB can be interfaced with 64-bit NetSim only. Following errors are assum...
Thu, 29 Dec, 2016 at 3:05 PM
Can I generate a NetSim simulation pcap file and open it in Wireshark ?
Yes. Users can generate pcap trace files which will be read by wireshark. To enable wireshark packet capture at the node, right click on node -->go t...
Fri, 21 Apr, 2017 at 10:25 AM
How do I plot the simulated TCP congestion window in Wireshark ?
Enable wiresark at sender end.  (Ref: https://tetcos.freshdesk.com/support/solutions/articles/14000061168-can-i-generate-a-netsim-simulation-pcap-file-and-...
Fri, 21 Apr, 2017 at 10:28 AM
How do I generate the simulated TCP's flow graph in Wireshark?
Go to Statistics from the WireShark Window -> Chose Flow Graph -> Select flow type either All flows or TCP flows. Mouse over any packet user will ...
Fri, 21 Apr, 2017 at 10:30 AM
How to reduce number of steps involved in MATLAB interfacing using System Environment Variables?
Upon downloading any file exchange project from NetSim File Exchange (http://www.tetcos.com/file-exchange.html), users can perform the following steps which...
Sat, 16 Dec, 2017 at 12:55 PM
Which versions of MATLAB can be interfaced with NetSim?
NetSim (v9 or higher) can be interfaced with MATLAB versions starting from R2011A to R2017A. Inorder to interface NetSim and MATLAB, both the tools should b...
Thu, 15 Mar, 2018 at 2:30 PM
Can you give a general idea of how to interface NetSim with MATLAB?
NetSim can be interfaced with MATLAB with the help of MATLAB Interfacing C file format and associated settings that are explained in NetSim User Manual and ...
Fri, 16 Mar, 2018 at 12:45 PM