5G NR mmWave

Detailed Q & A on NetSim's 5G NR mmWave Simulation Library

How to obtain the per UE PRB allocation in NetSim 5G?
Applicable Versions NetSim Standard NetSim Pro Applicable Releases v12.2 TABLE OF CONTENTS Introduction How to enable the PRB Log file? ...
Fri, 20 Nov, 2020 at 4:31 PM
5G Use Case: Analysis of throughput variation as a UE moves away from the gNB
Applicable Versions NetSim Standard NetSim Pro Applicable Releases  v12 Use Case: Impact of distance on the throughput of a 5G scenario where ...
Tue, 27 Oct, 2020 at 9:42 AM
How to add spurious noise in 5G-NR
Applicable Versions NetSim Standard NetSim Pro Applicable Releases v12 5G communication environments are expected to be used alone in a few ac...
Thu, 22 Oct, 2020 at 5:21 PM
5G RAN Use Case: Analyzing the impact of numerology on throughput and latency
Applicable Versions NetSim Standard NetSim Pro Applicable Releases v12 Use Case: Impact of numerology on throughput and latency of a 5G NR sce...
Mon, 19 Oct, 2020 at 7:23 PM
How to integrate SUMO for 5G simulations in NetSim?
Applicable Versions NetSim Standard NetSim Pro Applicable Releases v12.2 In 5G simulations, SUMO can be integrated to introduce vehicular m...
Wed, 9 Sep, 2020 at 3:58 PM
How is the cell selection and UE attach procedure modeled in NetSim 5G ?
Applicable Versions NetSim Standard NetSim Pro Applicable Releases v12.2 All gNBs broadcast MIB and SIB1 control packets at 80 ms and 160 m...
Tue, 8 Sep, 2020 at 8:54 AM
Plotting SNR from all gNBs at UE for 5G/LTE in NetSim
Applicable Versions NetSim Standard NetSim Pro SNR measured by UE can be logged into a text file in a format expected by NetSim metrics window. Upon ...
Thu, 3 Sep, 2020 at 9:28 AM
How can we simulate mid-band/C-band, at 3.5 GHz band (n78) in NetSim 5G NR?
The band can be selected in gNB properties Set the Phy layer -> CA-Type as Single_Band and then select the CA configuration as n78,
Sun, 9 Aug, 2020 at 9:00 PM
Can a non standard gNB height be set in NetSim 5G NR simulation?
The height of the gNB is a user defined value. When the chosen scenario is Urban Macro , the height of the gNB that a user would typically enter is  25m, wh...
Fri, 24 Jul, 2020 at 7:01 AM
How can I simulate O2I loss using buildings in NetSim 5G NR ?
The O2I Models such as Low Loss and High Loss are associated with the type of material used in the buildings and is used to calculate the penetration loss i...
Wed, 22 Jul, 2020 at 3:18 PM