Network Emulation - Interfacing with external PCs/Devices

How do I connect NetSim to real PC's ?
To do this, the NetSim emulation component is required. If this component is available then please see http://tetcos.com/emulator.html on how this work...
Sat, 4 Apr, 2020 at 11:28 AM
When I run ping in emulation why is it showing round trip delay but only one direction delay ?
Ping in emulation takes only one direction delay if you have set only one application with Ping Source IP and ping Destination IP. This is because PING is a...
Thu, 19 Aug, 2021 at 2:48 PM
How does an Emulation Application in NetSim Work?
Applicable Versions NetSim Standard NetSim Pro Note: The following explanation is provided assuming that you have performed all necessary configurations ...
Thu, 19 Aug, 2021 at 2:46 PM
We are developing an app, and want to know how to use NetSim emulator to study the effect of network congestion/delay on the app performance
To start off, you can have three PCs in your lab with PC1 running the application server, while PC3 runs the app client. In-between is PC2 where NetSim emula...
Wed, 18 Oct, 2017 at 10:56 AM
Is the real-virtual node mapping based on IP?
Yes, the virtual-real node mapping in NetSim emulator is IP based.   Virtual interfaces will also work but you need to configure your application/OS IP pro...
Thu, 19 Oct, 2017 at 10:53 AM
How can I scale my network and test app performance?
Please first read through the following articles: https://tetcos.freshdesk.com/solution/articles/14000065572-how-does-an-emulation-application-in-netsim...
Tue, 23 Jun, 2020 at 11:42 AM
How do I connect Raspberry Pi to NetSim?
Introduction The Raspberry Pi is a series of small single-board computers developed by the Raspberry Pi Foundation to promote lab experimentation on bas...
Thu, 28 Dec, 2017 at 2:09 PM
How do I send real video traffic into NetSim?
Applicable Versions NetSim Standard NetSim Pro Any real traffic irrespective of whether it's a video, audio, or file transfer, can be s...
Thu, 19 Aug, 2021 at 2:25 PM
Can I port my algorithm/protocol in NetSim codes to hardware?
It is impossible to port the protocol code written for a network simulator/emulator directly into hardware. This is true of all networks simulators. There ar...
Wed, 6 Feb, 2019 at 6:20 AM
How to enable IP forwarding in Windows for emulation using NetSim?
Applicable for NetSim Pro and NetSim Standard.  For more information on NetSim visit: https://tetcos.com/ Applicable Releases v10 v11 v12 v13 ...
Mon, 21 Mar, 2022 at 5:38 AM