Wireless LAN - 802.11

How do I check the receipt of block ack in 802.11n and 802.11ac?
Create a simple network scenario in internetworks as per the screenshot below Network settings: 1. Grid ength : 500*500m 2. Disable TCP in all nodes 3...
Tue, 1 May, 2018 at 5:30 PM
How to print parameters such as Rx Power, BER in WLAN simulation?
Applicable Versions NetSim Standard NetSim Pro To print the Received power and BER along with other parameters such as Packet ID, Transmitter ID, R...
Mon, 16 Aug, 2021 at 5:40 PM
How do I get the buffer size of Access Point?
To print the Received power and BER in NetSim console, follow the steps given below: STEP 1: Open  function fn_NetSim_IEEE802_11_MacInit() present in IE...
Tue, 15 May, 2018 at 2:22 PM
How is the PHY rate decided in NetSim 802.11?
Applicable versions NetSim Standard NetSim Pro   The PHY Rate when rate adaptation is set to false is based on Received power (RSSI) and SINR.  R...
Thu, 14 Oct, 2021 at 6:06 PM
Where is the API to find the SNR in 802.11? How do I use it?
Applicable Versions NetSim Standard NetSim Pro Applicable Releases v11.0 v12 v13 The API to calculate SNR in IEEE802.11 module can be found...
Wed, 18 Aug, 2021 at 2:25 PM
Where can I find source codes related to 802.11 ac MU-MIMO in NetSim?
Applicable Versions NetSim Standard NetSim Pro Applicable Releases v11 v12 v13 Open Netsim source codes in Visual Studio 2019 through Open cod...
Fri, 8 Oct, 2021 at 4:38 PM
How can I get plots for SNR in NetSim?
Applicable Versions NetSim Standard NetSim Pro Animation and Metrics Windows already consists of some default plots and tables with respect to the mo...
Tue, 17 Aug, 2021 at 12:47 PM
How do I write code to see the received power in a simple two node wireless system?
Applicable Versions NetSim Standard NetSim Pro 1. Go to the IEEE802_11 project, please add the code given below IEEE802.11 standard related code (IEE...
Thu, 12 Aug, 2021 at 10:50 AM
How to obtain a log of Receiver Sensitivity, Received Power and Phy Data Rate for 802.11 based simulations?
Applicable Versions NetSim Standard NetSim Pro Applicable Releases v12 Receiver Sensitivity, Received Power and Phy Data Rate in 802.11 can be lo...
Mon, 18 Jan, 2021 at 10:55 AM
Configuring and analyzing Frame Aggregation for WLAN in NetSim
Frame aggregation is a feature of the IEEE 802.11e, 802.11n and 802.11ac wireless LAN standards that increases throughput by sending two or more data frames...
Mon, 16 Aug, 2021 at 6:15 PM