Internet of Things (IOT), Wireless Sensor Networks, 802.15.4

Where can I find the latest LEACH source code?
LEACH Code for different versions of NetSim is available in TETCOS File Exchange
Sat, 5 Oct, 2019 at 4:33 PM
What is an agent in WSN simulation ?
The agent is an abstraction for what ever is being sensed by the sensor. So it is an abstraction for any physical phenomenon / property such as temperatur...
Sun, 17 Jul, 2016 at 12:42 PM
What is the WSN packet size and how is throughput calculated ?
The packet size is 24 bytes payload, and the overheads are as follows  Application layer -- Payload = 24 Bytes  Transport layer -- 8 bytes Overhead =...
Thu, 24 Nov, 2016 at 11:46 AM
How do I resolve the WSN sample config file problem in v8.3?
In the WSN Configuration.xml ICON PATH field is missing in the Device Properties. To get the Configuration file to open you will have to add it manually in ...
Tue, 19 Apr, 2016 at 4:04 PM
Is RPL protocol available in NetSim?
Routing Protocol for Low Power and Lossy Networks (RPL) per RFC 6550 is supported from NetSim v10 onwards.  The features supported in NetSim v10 is avai...
Tue, 16 May, 2017 at 8:28 AM
Why is application disabled in WSN ?
Yes, there are NO applications for WSN. The sensors "sense" the agent, and upon sensing application packets are generated automatically by NetSi...
Sat, 16 Jul, 2016 at 9:29 AM
I want to change the default ranges of the parameters, which file do I edit?
The range for the parameters is usually defined in the standard. If values are set beyond the prescribed range, then the protocol working may exhibit unpr...
Mon, 13 Nov, 2017 at 4:38 PM
How do I enable beacon mode in 802.15.4?
The note below explains how this can be done in NetSim v9.0. To Enable Beacon Mode: 1. Right click on the SinkNode and select properites. 2. In ...
Fri, 3 Nov, 2017 at 5:02 PM
How do I configure sleep time (inactive / active times) for Sensors in NetSim?
Beacon frame is one of the management frames in IEEE 802.15.4 based WSNs and contains all the information about the network. A coordinator in a PAN can opt...
Mon, 20 Mar, 2017 at 9:12 AM
How to configure static routes for sensors in NetSim?
As of v10.2 static routes for sensors cannot be configured through the GUI. Following is a temporary workaround to perform static routing using text files ...
Sat, 19 May, 2018 at 4:51 PM