Applicable Versions
NetSim Standard 
NetSim Pro 


Applicable Releases
v9.0v10v11v12



The way users can do research & run simulations on the DRX Mechanism would briefly be as follows -

  1. Define and set the DRX parameters to be used (Ref: drx-config structure under MAC-MainConfig) 
  2. Users can write their own algorithm to turn the UE state to OFF / ON (Sleep / Active)  
  3. In the eNBs MAC Scheduler if node is OFF, do not schedule data. Wait until the UE is turned ON 


Refer the following knowlegebase article for a detailed example:

https://support.tetcos.com/support/solutions/articles/14000085492-explain-a-simple-drx-implementation-in-netsim-lte-